Question

將5克鋅投入到105克稀硫酸里，鋅全部溶解生成硫酸鋅，反應后硫酸鋅溶液的溶質質量分?jǐn)?shù)為C₁；10克鋅投入100克稀硫酸時里，鋅也全部反應為硫酸鋅，反應后硫酸鋅溶液的溶質質量分?jǐn)?shù)為C₂．則C₁和C₂的大小關系是（　�。�

• A、C₁=C₂
• B、C₂＜2C₁
• C、C₂＞2C₁
• D、C₂=2C₁

Answer 1

分析：10g鋅全部反應為硫酸鋅的質量為5g鋅全部溶解生成硫酸鋅質量的2倍，即溶液的溶質質量分?jǐn)?shù)為C₂的硫酸鋅溶液中溶質質量是溶液的溶質質量分?jǐn)?shù)為C₁的硫酸鋅溶液中溶質質量的2倍；若的反應不放出氫氣，反應后兩溶液的質量相等，此時C₂=2C₁；考慮到10g鋅全部反應放出氫氣質量大于10g鋅全部反應放出氫氣質量，即溶液的溶質質量分?jǐn)?shù)為C₂的硫酸鋅溶液中溶液質量小于溶液的溶質質量分?jǐn)?shù)為C₁的硫酸鋅溶液中溶液質量，因此，C₂＞2C₁．

解答：解：根據鋅與硫酸反應生成硫酸鋅和氫氣，5g鋅全部反應生成硫酸鋅及放出氫氣的質量均為10g鋅全部反應生成硫酸鋅質量及放出氫氣質量的一半；
根據質量守恒定律，溶液的溶質質量分?jǐn)?shù)為C₂的硫酸鋅溶液中溶液質量小于溶液的溶質質量分?jǐn)?shù)為C₁的硫酸鋅溶液中溶液質量，而溶液的溶質質量分?jǐn)?shù)為C₂的硫酸鋅溶液中溶質質量是溶液的溶質質量分?jǐn)?shù)為C₁的硫酸鋅溶液中溶質質量的2倍；
根據溶液中溶質質量分?jǐn)?shù)=

溶質質量

溶液質量

×100%，可判斷得到C₁和C₂的大小關系為C₂＞2C₁；
故選C．

點評：根據質量守恒定律，鋅與硫酸反應后所得溶液的質量=鋅的質量+所加稀硫酸的質量-放出氫氣的質量．